 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EM6K6 Transistor 1.8V Drive Nch+Nch MOSFET EM6K6 Structure Silicon N-channel MOSFET Dimensions (Unit : mm) EMT6 Applications Switching Features 1) The MOSFET elements are independent, eliminating mutual interference. 2) Mounting cost and area can be cut in half. 3) Low on-resistance. 4) Low voltage drive (1.8V) makes this device ideal for portable equipment. Packaging specifications Package Type Code Basic ordering unit (pieces) EM6K6 Taping T2R Each lead has same dimensions Abbreviated symbol : K06 Equivalent circuit (6) (5) Gate Protection Diode (4) Tr1 8000 Tr2 (1)Tr1 (2)Tr1 (3)Tr2 (4)Tr2 (5)Tr2 (6)Tr1 Source Gate Drain Source Gate Drain Absolute maximum ratings (Ta=25C) Parameter Drain-source voltage Gate-source voltage Drain current Continuous Pulsed Symbol VDSS VGSS ID IDP 1 PD 2 (1) Gate Protection Diode (2) (3) Limits 20 8 300 600 150 120 150 -55 to +150 Unit V V mA mA mW / TOTAL mW / ELEMENT C C A protection diode has been built in between the gate and the source to protect against static electricity when the product is in use. Use the protection circuit when rated voltages are exceeded. Total power dissipation Channel temperature Storage temperature 1 Pw10s, Duty cycle1% 2 Each terminal mounted on a recommended land. Tch Tstg Thermal resistance Parameter Channel to ambient Each terminal mounted on a recommended land Symbol Rth(ch-a) Limits 833 1042 Unit C/W / TOTAL C/W / ELEMENT 1/3 EM6K6 Transistor Electrical characteristics (Ta=25C) Parameter Gate-source leakage Drain-source breakdown voltage Zero gate voltage drain current Gate threshold voltage Static drain-source on-state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Pulsed Symbol IGSS V(BR)DSS IDSS VGS(th) RDS(on) |Yfs| Ciss Coss Crss td(on) tr td(off) tf Min. - 20 - 0.3 - - - 400 - - - - - - - Typ. - - - - 0.7 0.8 1.0 - 25 10 10 5 10 15 10 Max. 10 - 1.0 1.0 1.0 1.2 1.4 - - - - - - - - Unit A V A V ms pF pF pF ns ns ns ns Conditions VGS=8V, VDS=0V ID=1mA, VGS=0V VDS=20V, VGS=0V VDS=10V, ID=1mA ID=300mA, VGS=4.0V ID=300mA, VGS=2.5V ID=300mA, VGS=1.8V ID=300mA, VDS=10V VDS=10V VGS=0V f=1MHz ID=150mA, VDD VGS=4.0V RL=67 RG=10 10V Body diode characteristics (Source-drain) (Ta=25C) Parameter Forward voltage Pulsed Symbol VSD Min. - Typ. - Max. 1.2 Unit V Conditions IS= 100mA, VGS=0V Electrical characteristic curves STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on) (m) STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on) (m) 1 VDS=10V Pulsed 10 VGS=4V Pulsed 10 VGS=2.5V Pulsed DRAIN CURRENT : ID (A) 0.1 0.01 Ta=125C 75C 25C -25C Ta=125C 75C 25C -25C 1 Ta=125C 75C 25C -25C 1 0.001 0.0001 0.00001 0.0 0.5 1.0 1.5 0.1 0.01 0.1 DRAIN CURRENT : ID (A) 1 0.1 0.01 0.1 DRAIN CURRENT : ID (A) 1 GATE-SOURCE VOLTAGE : VGS (V) Fig.1 Typical transfer characteristics Fig.2 Static drain-source on-state resistance vs. drain current () Fig.3 Static drain-source on-state resistance vs. drain current () 2/3 EM6K6 Transistor 10 VGS=1.8V Pulsed 100 1 STATIC DRAIN-SOURCE ON-STATE RESISTANCE : RDS(on) (m) VGS=0V Pulsed SOURCE CURRENT : IS (A) CAPACITANCE : C (pF) Ta=125C 75C 25C -25C 1 Ta=25C f=1MHZ VGS=0V Ciss 10 0.1 Ta=125C 75C 25C -25C Crss Coss 0.1 0.01 0.1 DRAIN CURRENT : ID (A) 1 0.01 0.0 0.5 1 1.5 1 0.01 0.1 1 10 100 SOURCE-DRAIN VOLTAGE : VSD (V) DRAIN-SOURCE VOLTAGE : VDS (V) Fig.4 Static drain-source on-state resistance vs. drain current () Fig.5 Source current vs. source-drain voltage Fig.6 Typical capacitance vs. drain-source voltage 1000 SWITHING TIME : t (ns) Ta=25C VDD=10V VGS=4V RG=10 Pulsed 100 10 td(off) tf td(on) tr 1 0.01 0.1 DRAIN CURRENT : ID (A) 1 Fig.7 Switching characteristics Switching characteristics measurement circuit Pulse width ID VDS D.U.T. RL VGS VGS VDS 50% 10% 10% 90% 50% RG 10% 90% 90% td (off) tf toff VDD td (on) ton tr Fig.8 Switching time measurement circuit Fig.9 Switching time waveforms 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0 |
Price & Availability of EM6K6
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |